18
Hopper
Capacity 20 bu. (705 L)
25 cu ft (0.7 m3)
Weight Empty: 390 lb. (177 kg)
Full: 650 lb. (295 Kg); Varies based on material
Ground Clearance 6-3/8 in. (162 mm.) (Distance between lower 3-point pins to bottom of hopper)
Material Sides: 1/16 in. (1.58 mm) aluminum
Gate: 1/16 in. (1.58 mm) steel
Storage Stands 1-1/2 in. (38.1 mm) square 11 gauge tubular steel
Blower System
Drive Type Belt
Belts Blower Belt: B51 V-belt
PTO Belt: B51 V-belt
Materials Fan: 7 gauge steel
Fan Housing Front and Rear: 11 gauge steel
Fan Housing Ring: 11 gauge 304 stainless steel
Fan Diameter 15-in. (381 mm.)
Number of Fan Blades 5
Fan Speed 3,000 RPM
Hose
Material Steel-coil vacuum hose
Diameter 8 in. (203 mm)
Length 5 ft (1.5 m)
Tractor Requirements
Horsepower Engine: 20+ HP
PTO: 17+ HP
Power Take-Off 540 RPM rear PTO shaft
3-Point Hitch Category 1 with 650+ lb. lift capacity
Electrical 12V / 30A connection
Mower Deck Mid-mount side-discharge deck
54 in. (1372 mm ) and 60 in. (1524 mm)
Counterweight Refer to the manufacturer or your dealer for proper ballasting requirements
Specifications
To Next Page
Loading...