Terrano terrano-x - Charging the Battery; General Functions; Power ON;OFF

ENGLISH
| 3
CHARGING THE BATTERY
Use the USB cable to charge the unit for at least 3 hours before initial use.
Channel “B” /
Channel “D”
Channel “A” / Channel “C”
While charging, the RED LED turns on. When charging is complete, the LED
will turn o.
GENERAL FUNCTIONS
Power ON/ OFF
Press for 2 seconds
• ON: 3 BLUE ashes, Ascending tone • OFF: 3 RED ashes, Descending tone
Volume
Tap or to adjust and set volume of current audio source
Mute
Tap and simultaneously
Battery Check
Press for 2 seconds and check the LED color:
• BLUE = Full charge • PURPLE = Half charge • RED = Almost empty
Automatic Volume
Adjustment
(Default: Enabled)
Automatic volume adjustemnt according to ambient noise and riding speed.
In Standby, press for 5 seconds
• Enabled: BLUE ash for 2 seconds • Disabled: RED ash for 2 seconds
Voice Activation
(Default: Regular)
Voice activation can be customized to make it more or less sensitive. Voice activation for
Intercom calls can also be turned OFF.
You can choose between ‘Regular’ and ‘High’ sensitivity. If you experience diculties starting
a conversation, change the setting to ‘High’:
In Standby, press and simultaneously for 2 seconds.
• Regular: BLUE ash for 2 seconds
• High: PURPLE ash for 2 seconds
• O: RED ash for 2 seconds
The TERRANO-X is waterproof
and dustproof. However,
when in use, the silicon cover
should be kept tightly closed
to prevent moisture from
entering the unit.