MIDI Master PRO Keyboard
21
7. Chorus button:
By using the chorus function, you may add a deep and rich stereo to the currently selected
sound. Using the chorus value by pressing Chorus button then moving the data entry
slide.
8. Reverb button:
By using the reverb function, you may add various types of reverb (echo) to the currently
selected sound. Using the chorus value by pressing Reverb button then moving the data
entry slide. A higher value of reverb makes a sound (patch) sounding more spaciously.
As the method mentioned above.
9. Octave +/- buttons:
When pressing these function buttons, it moves all keyboards data output one octave
up or down from MIDI Master PRO. Although the MIDI Master PRO has only 49 keys, you
may give it an effective and extended key range because of using these buttons. You van
up and down 3 octaves.
10.Pan-Pot buttons:
This function changes and sets Pan-Pot (the position of a voice in relationship to the
speakers) in 128 steps (from 0 to 127). 0=left, 64=center, 127=right. You may use data
entry slide to set the pan-pot value. Also, please check the manuals of your keyboard
and sound generator you are using, it is possible that you can use Control Change
message #10 to set the Pan-Pot effect level, too.
11. Volume button:
This button controls the main volume data which is transmitted from the MIDI Master
PRO. As mentioned above, you can alter the volume data of a note in any MIDI channel by
using data entry slide.
To Next Page
Loading...
