Terumo BCT T-RAC II - User Manual

MÁY CÂN, LẮC VÀ LẤY MÁU TỰ ĐỘNG
HƯỚNG DẪN SỬ DỤNG
02/2020
Digitally signed by
CÔNG TY TNHH
THIẾT BỊ Y TẾ
TERUMO VIỆT NAM
Date: 2022.04.06
11:14:07 +07'00'

Summary

1 Introduction

Intended use

Explains the purpose and operating environment of the T-RAC II device.

Symbols and definitions

Explains key symbols and terms used in the manual.

3 Important safety information

General safety precautions

Outlines critical safety instructions and warnings for device operation.

4 Specifications and accessories

4.1 Specifications

Details technical specifications of T-RAC II models, power, and environmental conditions.

4.2 Accessories

Lists standard and optional accessories available for T-RAC II.

5 Operating principles and functions

5.1 Battery

Details the types of batteries used, their charging, and status indicators.

5.2 Clamp

Explains the clamp's function and states for controlling blood flow.

5.3 On;off button

Describes the device's power button and LED indicator functionality.

5.4 Tray

Explains the usage and care of the donation tray.

5.5 Touch screen

Details the touch screen interface, its functions, and calibration.

5.6 Barcode reader

Explains connection and setup for the barcode reader.

5.7 Remote control

Describes remote control options and antenna indicators.

5.10 TOMES connection

Explains connecting T-RAC II to the TOMES system for data management.

5.11 USB flash drive

Details using a USB flash drive for data transfer.

5.12 Transport Case

Describes the optional transport case for accessories.

5.13 T-RAC II Quad charger

Explains the quad charger for T-RAC II batteries.

6 Installation and operation instructions

6.1 Installation - first time use

Guides the initial setup and connection of the T-RAC II device.

6.2 Operating instructions

Covers device startup, idle state, and the donation cycle.

6.2.1 Startup

Covers device startup and shutdown procedures.

6.2.2 Idle state

Explains the main interface and elements of the idle screen.

6.2.3 Donation cycle

Details the complete blood donation process and its steps.

6.2.4 Events

Explains various event types used during the donation cycle.

7 Settings

7.1 Device settings

Covers device-specific configurations like serial number, language, and password.

7.2 Programs

Explains how to manage, transfer, and configure donation programs.

7.3 Communication settings

Defines network settings for connecting to TOMES.

8 Alarms and error messages

8.1 Donation alarms

Lists and explains alarms occurring during the donation process.

8.2 System alarms

Lists and explains system-level alarms and errors.

8.3 Event warnings

Details warnings related to barcode events and BBIS communication.

9 Troubleshooting

Device startup and screen issues

Provides solutions for device startup failures and touch screen unresponsiveness.

10 Cleaning and maintenance

10.1 General cleaning

Instructions for general cleaning of the T-RAC II device.

10.2 Preventive maintenance

Describes recommended checks for weighing and alarm functions.

10.2.3 General maintenance

Details periodic servicing requirements for the T-RAC II.

11 High-energy battery shipping information

Shipping precautions for high-energy batteries

Provides guidelines and warnings for shipping the high-energy battery.

13 T-RAC II Wifi setup

Wi-Fi configuration steps

Outlines the procedure for setting up T-RAC II Wifi connectivity.

14 Symbol LS-2208 barcode reader set-up

Barcode reader configuration

Provides setup instructions for the Symbol LS-2208 barcode reader.

Terumo BCT T-RAC II Specifications