Terumo Harvest SmartPReP 2 User Manual

Page 7 of 26 4531200 / 1052
SMP2 Control Panels
Serial Number 0101- 5999
Serial Number 6000 >
Open Lid
Process
Platelet Concentrate
Process
Adipose Concentrate
Process
Bone Marrow Concentrate
Stop System
ACCESSORIES
The SmartPReP 2 System is compatible with Autologous Platelet Concentrate (APC+) Procedure Packs,
Bone Marrow Aspirate Concentrate (BMAC) Procedure Packs, and AdiPrep Adipose Transfer System
(AATS). Please refer to the Instructions for Use provided with each of the kits listed below for proper use
of those kits.*HAT kits not available in the U.S.
Balance Weight Chart
BW-20 Balance Weight
TA-20 Balance Weight/
Tube Adapter
Used with HAT Kit*. BW-20 is
needed for opposing rotor
BW-60 Balance Weight
TA-60 Balance Weight/
Tube Adapter
Used with HAT Kit*. BW-60 is
needed for opposing rotor
BW-30 Balance Weight
TA-30 Balance Weight/
Tube Adapter
Used with HAT Kit*. BW-30 is
needed for opposing rotor
AA-1 AdiPrep Adapter
Used with AATS Kits
2- AA-1 are required to process
BW-ADI AdiPrep Balance Weight
Used with AA-1 Adapter and AATS Kits
APC-120 & BMAC-120 kits do not require balance weights
BWAT-20 & BWAT-60 balance weights are avialable for international use with AT Pro Kits

Terumo Harvest SmartPReP 2 Specifications

General

Brand	Terumo
Model	Harvest SmartPReP 2
Category	Laboratory Equipment
Language	English