Need help?Do you have a question about the Terumo Terufusion TE-LF630 and is the answer not in the manual?
General| Type | Volumetric Infusion Pump |
|---|---|
| Accuracy | ±5% |
| Battery Type | Lithium-ion |
| Display | LCD |
| Operating Temperature | 5 to 40°C |
| Operating Humidity | 20 to 90% RH (non-condensing) |
| IP Rating | IP22 |
| Infusion Type | Continuous |
| Infusion Rate Range | 0.1 to 1200 mL/h |
| Volume to be Infused Range | 0.1 to 999.9 mL |
| KVO Rate | 0.1 mL/h to 5.0 mL/h |
| Alarms | Occlusion, Air-in-line, Door Open, End of Infusion, Low Battery, System Error |
| Air Detection | Ultrasonic air detector |
| Power Source | AC Power, Rechargeable Battery |
| Weight | Approx. 2.5 kg |
| Storage Temperature | -20°C to +60°C |
Explains the function of each button and indicator on the pump's control panel.
Provides warnings and cautions for the safe operation and use of the pump.
Lists important cautions for correct handling and installation of the pump.
Continues with safety precautions related to environment and usage.
Instructions for initial setup, including connecting to AC power and charging.
Details checks to perform before using the pump for the first time.
Instructions on how to connect the pump to an AC power source.
Details the procedure for powering on the infusion pump and the self-check process.
Detailed steps and precautions for attaching the drip sensor correctly.
Instructions on how to set the desired flow rate for solution delivery.
Guide to setting the Volume To Be Infused (VTBI) for the delivery.
Instructions for setting the duration for the VTBI.
How to initiate solution delivery and what to expect.
Explains common alarms and their resolutions when infusion fails to start.
How to adjust the pressure sensitivity for occlusion alarms.
How to adjust the sensitivity for air-in-line alarms.
Step-by-step guide to performing a Hands On Bolus infusion.
Explains the Hands Free Bolus function and its setup.
Highlights items requiring professional service and cautions.
General steps for addressing alarms and errors.
Explains causes and actions for the air-in-line alarm.
Details causes and corrective actions for upper occlusion alarms.
Explains causes and solutions for lower occlusion alarms.
Addresses causes and actions for flow rate abnormality alarms.
Explains causes and solutions for line empty and free flow alarms.
Explains causes and actions for door and completion alarms.
Causes and actions for the shutdown notice alarm due to low battery.
Addresses causes and actions for power failure alarms.
Explains causes and actions for no flow rate, no VTBI, and flow rate/VTBI judgment alarms.
Lists error codes, their display, and meaning.
To Next Page
