To Next PageTo Next PageWhat to do if alarm/error occurs on Terumo TERUFUSION TE-SS830P Medical Equipment?
If an alarm or error occurs with your Terumo Medical Equipment, follow the specific procedure for addressing that particular alarm or error. Before pressing the Start switch to resume solution delivery, double-check the flow rate and VTBI settings. If the problem continues, contact TERUMO-trained service technicians for repair assistance.
General| Brand | Terumo |
|---|---|
| Model | TERUFUSION TE-SS830P |
| Category | Medical Equipment |
| Language | English |
Explains the intended use and basic functionality of the pump.
Details the TCI mode operation with a compartment model.
Lists key features like display, alarms, and power system.
Defines key terms used in the manual.
Illustrates front and rear views of the pump with labeled parts.
Details the function of each button on the operation panel.
Explains the different screens and their elements in TCI mode.
Explains the meaning of various status icons on the LCD.
General warnings and cautions related to product use.
Specific warnings for safe operation and potential hazards.
Specific cautionary advice for safe operation.
Lists compatible syringe brands and their dimensions.
Steps for inspecting the pump and its components before use.
Procedure for connecting the pump to AC power.
Detailed steps for operating the pump in TCI mode.
Step-by-step guide to setting the syringe.
How to start the infusion.
How to set the hourly flow rate.
Procedure for priming the infusion line.
How to stop the infusion.
How to set the occlusion detection pressure level.
How to enable/disable the keypad lock.
Explains advanced dose modes like Interval/Intermittent, Multi-step, Delayed Start.
How to adjust alarm and key volumes.
How to set the device’s date and time.
General procedure for handling alarms and errors.
Details on high priority alarms like Plunger/Syringe Displacement.
Details on low priority alarms like No Flow Rate.
Presents flow rate and occlusion characteristics data.
Details start-up and trumpet curves for flow rate.
Provides data on occlusion detection.
Information regarding EMC compliance and precautions.
Explains the meaning of various symbols used in the manual.
