TES TES-1304 - System Setup and Navigation; Physical Interfaces and Power Compartment

9
10. T
1
/T
2
/T
1
-T
2
measuring :
Button for select display methods, T
1,
T
2,
T
1
-T
2
, cycle and normal cycle
mode means it will perform T
1,
T
2,
T
1
-T
2
measuring circularly.
11. MENU
：
Button for start/stop set-up parameters mode.
The value will be increased much fast if user do not release the key.
12. UP
：
Button for increasing the value of parameters, increasing the
parameter rapid.
13. RIGHT
：
Button for moving to the desired parameter.
14. DOWN
：
Button for decreasing the value of parameters.
15. LEFT
：
Button for moving to the desired parameter.
Parameters (in sequence):
K/J/E/T (type of thermocouple)
00/01 (interval printing enable or disable)
℃
/
℉
(high/ low alarm temperature unit)
Hi/Lo Alarm (high/low alarm point ranging from measure highest and
measure lowest of temp type.)
Ex: K Type (1333.3 ~ -200.0
℃
)
J
Type ( 760.5 ~ -200.0
℃
)
INTV (printing interval ranging from 00h:00m:03s to 23h:59m:59s)
Interval printing start / stop time (ranging from 00h:00m to 23h:59m)
Calendar year (ranging from 1900 to 2999 year)
Calendar month-day (ranging from 01-01 to 12-31)
Calendar hour-minute (ranging from 00h:00m to 23h:59m)
Calendar minute-second (ranging from 00m:00s to 59m:59s)
16. Way out for thermo-paper.
17. Temperature probe sockets.
18. Battery cabinet and cover
：
6 pcs 1.5V size AAA alkaline batteries.