Need help?Do you have a question about the TES TES-133 and is the answer not in the manual?
General| Model | TES-133 |
|---|---|
| Category | Measuring Instruments |
| Power Supply | 9V battery |
| Display | LCD |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 10~80%RH |
Details the physical buttons and their primary functions on the TES-133 meter.
Explains the symbols, indicators, and readings shown on the meter's LCD screen.
Guides users on adjusting the calibration factor for accurate luminous flux measurements.
Provides step-by-step instructions for performing luminous flux measurements with the meter.
Details how to record and display maximum and minimum measured values.
Explains manual and auto data hold functions to freeze measurement readings.
Describes offsetting dark current readings for accurate zeroing of the meter.
Covers using current or set values as references for ratio measurements.
Explains combined zero and ratio operations using current or reference values.
Details ratio measurements combined with zeroing, using current or reference values.
Covers setting reference values and tolerance limits for sorting measurements.
Guides on setting high/low limits for comparator function and its operation.
Explains how to memorize, recall, and clear measurement data manually.
Details setting interval times and entering/clearing auto datalogging modes.
Describes activating and using the RS232 interface for data transfer.
Explains how to disable the meter's automatic power off feature.
To Next Page
