TES TES-133 - 5-3 Maximum & Minimum Recording Measurement; 5-4 Hold Function Operation

12
5-3 Maximum & Minimum Recording Measurement
1. Press
key to enter the recording mode, the auto power off
function will be auto cancelled.
2. Press key to display the Maximum (MAX), Minimum
(MIN) and Current (MAX MIN) measured values.
3. Press this key for 3 seconds exit this mode.
MINMAX
5-4 Hold Function Operation
A. Data Hold
1. Press key to freeze an instantaneous measurement enter
to the data hold mode, the “ D-H ” annunciator is displayed.
2. Press key again to exit this mode.
B. Auto Data Hold
1. Press key for 3 seconds to enter auto data hold mode, the
A-H annunciator is blink.
2. When the measured reading is stable (±
±±
± 3 digits), the meter will
auto hold the data, the “ A-H ” annunciator is fixed.
3. Press key again will repeat itself.
4. Press key for 3 seconds to exit this mode.