TES TES-133 - 5-9 Sort Function Operation

16
B. Use the current reference value
1. Press
key to display the reference value (
φ
REF
).
2. Press key, the LCD will read : RATIO =
φ
φ
in
REF
3. Press key, the LCD will read : RATIO =
φ
φ
φ
in d
REF
−
ZERORATIO
5-9 Sort Function Operation
A. Setting the reference value (see 5-6. B.1).
The reference value can not less than 0.100 lumen in the sort mode.
B. Setting the sort tolerance limits.
1. Press key first then press key to enter the sort
tolerance limits setting mode, the “ SET SORT ” annunciator is
displayed.
2. Press   keys to set the desired tolerance limits from 10% to
100%.
3. Press key to stored the value and exit this mode.