TES-1306
INSTRUCTION MANUAL
TES ELECTRICAL ELECTRONIC CORP.
1. SAFETY INFORMATION
This instrument is a digital thermometer for use with any K/J-type
thermocouple as temperature sensor. Temperature indication
follows National Bureau of Standards and IEC584 temperature /
voltage tables for K/J-type thermocouples.
Read the following safety information carefully before
attempting to operate or service the meter.
Use the meter only as specified in this manual; otherwise, the
protection provided by the meter may be impaired.
Environment conditions
Altitude up to 2000 meters
Relatively humidity 90% max.
Operation Ambient 0 ～40℃
Maintenance & Clearing
Repairs or servicing not covered in this manual should only be
performed by qualified personnel.
Periodically wipe the case with a dry cloth. Do not use
abrasives or solvents on this instruments.
Safety symbols
Meter is protected throughout by double insulation or
reinforced insulation.
When servicing, use only specified replacement parts.
To Next Page
Need help?
General