7
USING YOUR AIR FRYER
Using your air fryer
Before first use
1. Remove all packaging stickers and labels from the air fryer, including the tape securing the Pan to the unit.
2. To pull out the Basket for cleaning, remove the tape securing it into place. Secure the unit with one hand and pull the
handle straight back with the other hand.
3. Thoroughly clean the Basket and Crisper Tray with hot water, some dishwashing liquid, and a non-abrasive sponge.
4. Wipe the inside and outside of the air fryer with a moist cloth.
During the first few uses, there might be a “hot plastic” smell. This is perfectly normal in new air fryers as the material is
heated for the first time. It will go away after the first few uses.
• Do not fill the Basket with oil, frying fat, or any other liquid - this appliance works by circulating
• Do not put anything on top of the air fryer.
• Do not place the air fryer against a wall or against other appliances. It is important to leave at least 10 cm / 3.9 in of free
space around the back and sides, and 10 cm / 3.9 in of free space above the air fryer to allow for proper ventilation.
1. Place the air fryer on a stable, horizontal, heat-resistant, and level surface.
2. Insert the Crisper Tray into the Basket and slide it into the air fryer.
3. Plug the air fryer into an outlet.
4. Tap the Power Icon to turn on.
5. Tap the desired Preset
The Display will show the preset temperature and time.
To adjust temperature and time follow instructions.
NOTE
WARNING!
To Next Page
Loading...
