Learn more about your vehicle and the status of software updates.
◦ Get more information about your vehicle such as the VIN, vehicle name, and odometer.
Touch Additional vehicle information to display a list of the various options your vehicle is
equipped with.
NOTE: You can also display some of the vehicle information by touching the Tesla "T" at the
top center of your touchscreen.
◦ View your current software version, map version, and release notes.
◦ See new updates that are available. Your vehicle must be connected to Wi-Fi to start the
update (see
Software Updates on page 184).
◦ Observe your software's download progress.
The yellow clock icon at the top of the touchscreen is replaced by a green download icon
when a software update is available, your vehicle is connected to Wi-Fi, and the update is
downloading. A yellow download icon appears when a software update is available, but the
vehicle is not connected to Wi-Fi. Ensure your vehicle is connected to Wi-Fi to start the
download.
◦ Customize how often you want to receive software updates by touching Software Update
Preferences.
Glovebox Touch to open the glovebox (see Glovebox on page 25).
Naming Your Vehicle
To further personalize Model 3, you can name it. The name of your Model 3 appears in the
mobile app. To name your vehicle, touch the Tesla “T” at the top center of the touchscreen, then
touch
Name Your Vehicle (or touch the vehicle's existing name). Enter the new name in the
popup, then touch
Save.
Speed Limit Mode
Speed Limit Mode allows you to limit the acceleration and maximum speed – between 50 and
90 mph (80 and 145 km/h) – of your Model 3. This feature is protected by a 4-digit PIN that you
create when enabling it for the
first time, and which must be entered whenever you want to
disable and enable it.
If your Model 3 comes within approximately 3 mph (5 km/h) of the selected maximum speed, a
chime sounds and text appears on the touchscreen above the driving speed. Additionally, your
mobile app sends you a
notification.
To enable Speed Limit Mode:
1. Ensure the vehicle is in Park.
2. Touch Controls > Safety & Security > Speed Limit Mode on the touchscreen or CONTROLS
in your mobile app.
3. Select the maximum driving speed that you would like to limit the vehicle to.
4. Drag the slider to the ON position.
5. Enter the 4-digit PIN that you want to use to disable and enable Speed Limit Mode.
Controls
152 MODEL 3 OWNER'S MANUAL
To Next Page
Loading...
