WARNING: Only restart the
touchscreen while the vehicle is
stopped and in Park. The car status
display, safety warnings, backup
camera, etc. will not be visible during
the restart.
1. Shift into Park.
2. Hold down both scroll buttons on the
steering wheel until the touchscreen turns
black.
3. After a few seconds, the Tesla logo
appears. Wait approximately 30 seconds
for the touchscreen to restart. If the
touchscreen is still unresponsive or
demonstrating unusual behavior after a few
minutes, try power cycling the vehicle. See
Power Cycling the Vehicle on page 65.
NOTE: Restarting the touchscreen using the
scroll buttons does not power
Model 3 o
and on.
Power Cycling the Vehicle
If your vehicle demonstrates unusual behavior
or a nondescript alert is present, you can try
power cycling the vehicle to potentially
resolve the issue.
1. Shift into Park.
2. On the touchscreen, touch Controls >
Safety & Security > Power O.
3. Wait for at least two minutes without
interacting with the vehicle. Do not open
the doors, touch the brake pedal, touch the
touchscreen, etc.
4. After two minutes have passed, press the
brake pedal or open the door to wake the
vehicle.
Starting and Powering O
65Driving
To Next Page
Loading...
