EasyManua.ls Logo

Tesla MODEL S 2012 - Page 103

Tesla MODEL S 2012
250 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Stopping or Canceling Summon
Stop Model S at any time while Summon is active by
using the mobile app or by pressing any button on the
key fob. Summon also cancels when:
A door handle is engaged or a door is opened.
You interact with the steering wheel, brake pedal,
accelerator pedal, or shift.
Model S detects an obstacle.
Summon has moved Model S the maximum distance
of approximately 39 feet (12 meters).
Your phone enters sleep mode or loses connectivity
to Model S.
Limitations
Summon is unlikely to operate as intended in the
following types of situations:
The driving path is sloped. Summon is designed to
operate on flat roads only (up to 10% grade).
A raised concrete edge is detected. Summon does
not move Model S over an edge that is higher than
approximately 1 in (2.5 cm).
One or more of the ultrasonic sensors is damaged,
dirty, or obstructed (such as by mud, ice, or snow, or
by a vehicle bra, excessive paint, or adhesive
products such as wraps, stickers, rubber coating,
etc.).
Weather conditions (heavy rain, snow, fog, or
extremely hot or cold temperatures) are interfering
with sensor operation.
The sensors are aected by other electrical
equipment or devices that generate ultrasonic waves.
NOTE: Summon is disabled if Model S is in Valet mode
(see Valet Mode on page 40).
WARNING:
The list above does not represent an
exhaustive list of situations that may interfere with
proper operation of Summon. It is the driver's
responsibility to remain in control of Model S at all
times. Pay close attention whenever Summon is
actively moving Model S and stay prepared to take
immediate action. Failure to do so can result in
serious property damage, injury or death.
Summon
101Autopilot

Table of Contents

Related product manuals