ATTENTION: Read this entire document before installing or using Powerwall. Failure to do so or to follow
any of the instructions or warnings in this document can result in electrical shock, serious injury, or death, or
can damage Powerwall, potentially rendering it inoperable.
Important Safety Instructions
This manual contains important instructions for the Tesla Powerwall 2 AC and Backup Gateway that must be
followed during installation and maintenance of the system.
Symbols Used
CAUTION: indicates a hazardous situation
which, if not avoided, could result in minor
injury or damage to the equipment.
RISK OF ELECTRIC SHOCK: indicates
components that present risk of
electrical shock.
WARNING: indicates a hazardous situation
which, if not avoided, could result in injury or
death.
CAUTION, RISK OF ELECTRIC SHOCK,
ENERGY STORAGE TIMED
DISCHARGE. Discharge time is 5
minutes from de-energization.
NOTE: indicates an important step or tip that
leads to best results, but is not safety or
damage related.
BIDIRECTIONAL TERMINAL: Indicates
location of combined input/output
connector on the equipment.
REFER TO OPERATING INSTRUCTIONS:
indicates that user should refer to operating
or installation instructions before proceeding.
PROTECTIVE CONDUCTOR
TERMINAL: Indicates location of
grounding connection on the
equipment.
General Information
WARNING: Read this entire document before installing or using Powerwall. Failure to do so or to follow
any of the instructions or warnings in this document can result in electrical shock, serious injury, or
death, or may damage Powerwall, potentially rendering it inoperable.
WARNING: A battery can present a risk of electrical shock, fire, or explosion from vented gases.
Observe proper precautions.
WARNING: Powerwall installation must be carried out only by a competent electrician who is certified
by Tesla and who has been trained in dealing with low voltage electricity.
WARNING: Powerwall is heavy. Use of lift equipment is recommended.
WARNING: Use Powerwall only as directed.
WARNING: Do not use Powerwall if it is defective, appears cracked, broken, or otherwise damaged, or
fails to operate.
WARNING: Before beginning the wiring portion of the installation, ensure that Powerwall is switched
o, and lock out any associated circuit breakers and disconnect switches (if applicable for the
installation).
GENERAL WARNINGS AND INFORMATION
3Powerwall 2 AC Installation Manual
General Warnings and Information
To Next Page
Loading...
