After turning on the receiver for the first time, you will be greeted by an installation
wizard. Select OSO language, country of use, whether to search for uncoded stations
(FTA) or whether you want to activate SV on the antenna connector to feed the
antenna amplifier. On the last line "Searching for stations", press OK on the remote
control to start the search.
www.tesla-electronics.eu
17
www.tesla-electronics.eu
45
You can access the program using the MENU button on your controller.
4.1 EDITING THE LIST OF STATIONS
First, on the remote control, use the TV/R button to select which station list you want
to edit. Use the number buttons 1 to 5 on the controller to select one of the options:
1. DEL - deleting stations from the list.
2. MOVE - move stations in the list. Select a station in the list and press OK.
Subsequently, the symbol of two red arrows will appear in the line. Use the navigation
keys to move the station to a new position and press OK again. OK to save.
3. SKIP - mark the stations that will not be displayed when you switch stations using
the navigation keys. They will be skipped.
4. LOCK - here you can lock stations. To view them, you will be required to enter the
receiver's password.
5. FAV - here you can create your own favorite station lists.
To Next Page
Loading...