Operation
Testboy
®
20 Plus 31
Changing the batteries
Use a screwdriver to leverage the up-
per housing section upwards and to-
wards the front, between the protrud-
ing knobs and the middle socket (refer
to Figure 4). To remove the lid, un-
hook downwards. Make sure you in-
sert the new batteries with the polarity
properly aligned!
Do not dispose of batteries in
normal household rubbish!
Use an authorised local col-
lection point!
Figure 4
WARNING! DANGER OF DEATH!
All test leads should be removed before opening up
the continuity tester!
To Next Page
Loading...
