23
7. Programming
It is only possible to select
Date/Time
if
Date/Time
is also
selected as
Start criterion
. If you choose
No. of logs
an
additional field will appear in which the number of
measurements required can be entered.
testo 177-T3:
Date/Time
is not possible as
Stop criterion
if
door contact is activated.
Duration:
Indicates running time of program calculated on the basis of the
values for
Start criterion
,
Measuring rate
and
Stop criterion
.
If the
Wraparound
stop criterion is selected, the length of time
until the memory is full is calculated.
Estimated battery life:
Indicates estimated battery life.
Title:
Enter a Title for the measuring program.
Maximum 24 characters can be entered.
The title of the measuring program is accepted into the testo
ComSoft
software when the data logger is read out. The title will
appear at the top of the printout when the protocol is printed on
the testo 575 printer.
Comments:
Additional information on the measuring program can be
entered here.
The entered text is printed on the testo 575 printer printout. Up
to 96 characters can be entered. The fast printer automatically
enters return after every 24 characters.
Send to:
Activate the function by clicking on the selection window and
enter an e-mail address in the text box.
Once the measurement protocol has been opened in the testo
ComSoft
software, you can send it by e-mail via
File
>
Send
...
The entered email address and the log are automatically saved in
your e-mail.
System requirement for this function:
Microsoft Windows 95 or newer and
Microsoft Internet Explorer 5.0 or newer.
To Next Page
Loading...
Need help?
General
