TESTO 177 - NTC Probes for testo 177-T3;H1

12. Accessories/Spare parts
35
Accurate NTC probes for testo 177-T3 and testo 177-H1 data loggers
* Probe tested in accordance with EN 12830 for suitability in the areas of transport and storage.
-35... +80 °C 0610 1725
Accurate immersion/penetration probe,
cable length 6 m *
40 mm
Ø 3 mm
Ø 3 mm
-50... +70 °C 0613 4611
Pipe probe with Velcro, for pipe diameter
of max. 75 mm
300 mm
30 mm
-50... +150 °C 0613 1711
Robust, affordable air probe, for checking
storage temperature, for example *
110 mm
Ø 4 mm
-50... +140 °C 0613 3211
Frozen food probe, no drilling required *
110 mm
30 mm
Ø 4 mm
Ø 8 mm
-50... +150 °C 0613 2211
Food probe (IP65) made of stainless steel,
PUR cable, can be used up to +80 °C,
plug-in connection IP54 *
125 mm
15 mm
Ø 3 mm
Ø 4 mm
-50... +150 °C 0613 2411
Robust food penetration probe
with special handle, IP 65,
reinforced cable (PUR) and
reinforced bending protection *
115 mm
30 mm
Ø 3.5 mm
Ø 5 mm
-20... +90 °C 0628 7503
Mounting probe with aluminium sleeve, IP65
Cable length: 2.40 m *
40 mm
Ø 6 mm
-50... +80 °C 0628 7514
Screw-in probe for measurements in
difficult to access places, M6 thread, IP 54;
cable length: 2 m *
-50... +80 °C 0628 7516
Probe for surface measurement;
cable length: 2 m *
8 x 8 mm
-50... +80 °C 0628 7507
Wall surface temperature probe,
e.g. for proof of damage to building
structure; cable length: 3 m
-20... +70 °C
Stub probe *
35 mm
Ø 3 mm
Meas. range
Description
Illustration Part no.
40 mm
0628 7510