Do you have a question about the TESTO 316-2 and is the answer not in the manual?
Storage temperature | -20 °C to +50 °C |
---|---|
Alarm | Audible and visual |
Dimensions | 190 x 57 x 42 mm |
Detectable gases | Methane, Propane |
Lower Explosive Limit (LEL) | 0-100% LEL |
Sensor type | Semiconductor |
Operating temperature | -5 °C to +45 °C |
Measurement range | 0-100% LEL |
Power supply | Battery operated |
Response time | < 2 seconds |
General safety precautions for preventing harm to users and the instrument during operation.
Guidelines for proper disposal of batteries and end-of-life product handling for environmental protection.
Describes the purpose and primary functions of the testo 316-2 gas leak detector.
Crucial instructions and warnings for safe and effective use of the device.
Details on sensor specifications, measuring ranges, and reaction times for detected gases.
Information on operating conditions, storage, battery, dimensions, and compliance.
Overview of the device's display indicators, symbols, and control buttons.
Instructions for charging the rechargeable battery using the provided mains unit.
Guide on connecting and using the optional earplug accessory with the instrument.
Step-by-step process for powering on the testo 316-2 and its initialization phase.
How to choose the specific gas type to be detected by the instrument.
Procedure for temporarily ignoring ambient gas levels for more accurate leak detection.
Instructions on how to perform leak detection with the gas detector.
How to reset the stored maximum gas concentration readings.
Procedure for safely powering down the testo 316-2.
Method for cleaning the gas sensor to ensure optimal performance and prevent contamination.
Instructions for cleaning the exterior casing of the instrument.
Guidelines for proper storage and transport to prevent sensor contamination.
Recommendation for periodic professional servicing by an authorized service center.
List of available accessories and their corresponding part numbers for purchase.