Need help?Do you have a question about the TESTO 316-4 and is the answer not in the manual?
General| Detectable Gases | Methane, Propane |
|---|---|
| Storage Temperature | -20°C to +50°C |
| Type | Gas detector |
| Alarm | Visual and audible alarm |
| Power supply | 2 x AA batteries |
Information on manual usage and symbol identification.
Guidelines for safe operation to prevent harm or damage.
Procedures for proper disposal of batteries and the product.
Describes the testo 316-4's purpose and capabilities for leak detection.
Lists technical specifications, sensor details, operating conditions, and dimensions.
Details relevant EC guidelines, norms, and tests the product complies with.
Information on the product's warranty period and conditions.
Identifies major components of the testo 316-4 leakage detector.
Explains the meaning of display illumination colours and symbols.
Details the function of each operating button on the instrument.
Describes how the audible notification indicates gas concentration levels.
Guides on initial setup, including battery charging and earplug usage.
Step-by-step instructions for powering on the device and its initialization.
How to choose the specific gas type for detection using the instrument.
Process for standardizing the instrument to the current gas concentration.
Instructions for switching between Localization and Search modes.
Procedure for performing leak detection using the sensor head.
How to reset the displayed maximum gas concentration value.
Instructions for properly powering down the testo 316-4 device.
Refers to the "First steps" section for battery charging instructions.
Steps for replacing the sensor head, including safety precautions.
Methods to clean the sensor to maintain sensitivity and accuracy.
Instructions for cleaning the sensor head with a soft dry cloth.
How to clean the instrument housing using a damp cloth and soap solution.
Recommendation for yearly servicing by an authorized center.
Provides solutions for common error messages and troubleshooting issues.
Lists refrigerants detectable by the instrument and their selection in the device.
Lists available accessories and spare parts with their corresponding part numbers.
Detailed instructions for electronic probe-type leak detection as per SAE standard.
To Next Page