TESTO 410-2 User Manual

Maintaining the product 17
Maintaining the product
±
Changing bbatteries:
1 To open the battery compartment, push the battery cover
down.
2 Remove used batteries and insert new batteries
(2x 1.5 V type AAA). Observe the polarity!
3 To close the battery compartment, push the battery cover
back on.
±
Cleaning tthe hhousing:
i Clean the housing with a moist cloth (soap suds) if it is dirty.
Do not use aggressive cleaning agents or solvents!
Tips and assistance
Questions and answers
Question Possible causes/solutions
Hi or Lo · Readings outside the measuring range (too high, too
low): Keep to the permitted measuring range.
· Residual capacity <10 min: Change batteries.
If we could not answer your question, please contact your dealer
or Testo Customer Service. Contact details can be found on the
guarantee card or on the Internet at: www.testo.com
de
en
fresitptsvnl????

TESTO 410-2 Specifications

General

Measurement Parameters	Air velocity, Temperature, Humidity
Air Velocity Range	0.4 to 20 m/s
Temperature Range	-10 to +50 °C
Humidity Range	0 to 100 %RH
Resolution (Air Velocity)	0.1 m/s
Resolution (Temperature)	0.1 °C
Resolution (Humidity)	0.1 %RH
Accuracy (Temperature)	±0.5 °C
Display	LCD
Power Supply	2 x AAA batteries
Operating Temperature	-10 to +50 °C
Storage Temperature	-20 to +70 °C
Dimensions	133 x 46 x 25 mm
Units	m/s, °C, %RH
Measuring Principle	Vane anemometer