Need help?Do you have a question about the TESTO 410-2 and is the answer not in the manual?
General| Measurement Parameters | Air velocity, Temperature, Humidity |
|---|---|
| Air Velocity Range | 0.4 to 20 m/s |
| Temperature Range | -10 to +50 °C |
| Humidity Range | 0 to 100 %RH |
| Resolution (Air Velocity) | 0.1 m/s |
| Resolution (Temperature) | 0.1 °C |
| Resolution (Humidity) | 0.1 %RH |
| Accuracy (Temperature) | ±0.5 °C |
| Display | LCD |
| Power Supply | 2 x AAA batteries |
| Operating Temperature | -10 to +50 °C |
| Storage Temperature | -20 to +70 °C |
| Dimensions | 133 x 46 x 25 mm |
| Units | m/s, °C, %RH |
| Measuring Principle | Vane anemometer |
General information and important symbols for understanding the manual.
Guidelines to avoid personal injury and damage to equipment during operation and maintenance.
Procedures for proper disposal of batteries and end-of-life product.
Detailed measurement data, including sensors, parameters, ranges, and accuracies.
Includes protection class, ambient conditions, voltage supply, battery life, dimensions, and weight.
Information on EC directives, standards, tests, and warranty duration.
Visual identification of device components and a brief description of the product's purpose.
Instructions for inserting batteries and performing basic settings and configuration.
Tips for correct instrument positioning and avoiding environmental interference.
Steps for switching the instrument on, off, and activating the display light.
How to change the displayed measurement parameter (e.g., velocity, humidity).
How to switch between different display modes like Current, Hold, Max, Min, and Avg.
Procedure for calculating and displaying the average flow value over time.
Steps to clear stored maximum and minimum measurement values.
Procedure to power down the instrument by holding the power button.
Instructions for opening the compartment, removing old batteries, and inserting new ones.
Guidance on cleaning the instrument's exterior with a moist cloth, avoiding solvents.
Common questions, possible causes for 'Hi' or 'Lo' readings, and contact information.
To Next Page
