TESTO 545 - Opening configuration mode; Setting the unit

7 Using the product
13
Function Setting options/comments
MENU/ENTER
Open configuration mode
Start continuous measurement /
record multi-point readings
(Operation also possible directly on
measuring instrument if it is connected
to the app)
In configuration mode:
Confirm input
Print (long press)
Output readings via external printer
Arrow right
In configuration mode:
Increase value, select option
7.1.2
Opening configuration mode

The instrument is switched on and is in the measurement view.
1
Press MENU/ENTER until the display changes.

The instrument is now in configuration mode.

Press MENU/ENTER to switch to the next function. You can leave
configuration mode at any time. To do this, press MODE/END until the
instrument has changed to the measurement view. Any changes that
have already been made in configuration mode will be saved.
7.1.3
Setting the unit

Configuration mode is open, “UNITS” is displayed.
1
Press ◄ / ► to choose between metric (“METR”) and imperial
(“IMPER”) units of measurement and confirm with MENU/ENTER.

The currently set unit flashes.
2
Press ◄ / ► to set the required unit and confirm with MENU/ENTER.
1.888.610.7664 sales@GlobalTestSupply.com
www.Testo-Direc t.com