Need help?Do you have a question about the TESTO Hygrotest 600 WH and is the answer not in the manual?
General| Brand | TESTO |
|---|---|
| Model | Hygrotest 600 WH |
| Category | Measuring Instruments |
| Language | English |
Provides physical dimensions of the instrument in mm.
Lists key benefits like price/performance, interference immunity, and low costs.
For monitoring ambient air conditions with external probe.
For duct measurement in compact design with external probe.
With external humidity and temperature probe, 2m cable.
Options for analog output, specifically 4 to 20 mA (2-wire).
Options for probe material and length.
Options for cable length.
Option for humidity inaccuracy adjustment.
Options for sensor protection caps.
Options for display types and interfaces.
Options for scaling measurement channels.
Option to select temperature measurement unit in Celsius.
Option to select temperature measurement unit in Fahrenheit.
Explains the principles and advantages of 2-wire technology.
Provides connection diagrams for current measurement.
Provides connection diagrams for voltage measurement.
General advice on optimizing measurement accuracy.
Advice on using a PTFE sintered cap in dusty environments.
Advice on using a stainless steel sintered cap for high flow.
Advice on fitting a deflector for very high flow or particle loads.
Advice on probe installation to prevent condensate issues.
Advice on potential impact of chemical gases on sensors.
Describes the process of adjusting with a Testo 650/400 reference instrument.
Describes 2-point adjustment using a control and adjustment set.
Instructions for cleaning the humidity sensor using isopropanol.
Lists available accessories for the Hygrotest 600.
Lists additional accessories, power supply, and connection cables.
To Next Page
