TESY 19-21 - Operation of Electrical Convector Via the Internet; Specification of the Built-In Wireless Communication Module (Wi-Fi); Settings of the In-Built Wi-Fi Communication Device; Status Indication of the Appliance

EN
Operation and Storage Manual of Panel Heater 19English
INSTRUCTIONS FOR OPERATION OF ELECTRICAL CONVECTOR VIA THE INTERNET
Thank you for your trust as a consumer which you have granted to us by purchasing the electrical appliance with a built-in wireless communication module. The
only condition for using the inbuilt wireless communication module in TESY appliances is to have a device which is able to connect to Wi-Fi networks, and has a
reliable Web browser and internet connection.
SPECIFICATION OF ΤΗΕ BUILT-IN WIRELESS COMMUNICATION MODULE (WI-FI)
Product Wi-Fi module
Model Name ESP32-WROOM-32E
Frequency range 2. 412 - 2.484 GHz
Rated RF output power 20 dBm
Number of channels 13
Separation between channels 22 MHz
Modulation type OFDM
Antenna type PCB/3.4bBi
Protocol ΙΕΕΕ802. 11 b/g/n20/n40
EU DECLARATION OF CONFORMITY
Hereby, TESY Ltd. declares that the Electrical convector with a built-in wireless communication module - ESP32-WROOM-32E is in compliance with Directive
2014/53/EU.
Тhe full text of the EU declaration of conformity is available at the following internet address: https://tesy.com/products/heating-appliances/electric-panel-
convectors .
ORDER OF THE STEPS FOR CONNECTING THE INBUILT WIFI MODULE IN A
TESY APPLIANCE TO THE INTERNET
/QUICK START A/
You need to register on www.mytesy.com. If you already have a registration, go
directly to SETTINGS OF THE IN-BUILT WIRELESS COMMUNICATION MODULE
Registration on www.mytesy.com.
1. Open the web address www.mytesy.com in the address bar of the web browser.
2. You can change language from drop down menu located under TESY Brand.
3. Choose "Register as a new user".
4. Fill in the registration form using a valid email address.
5. You will receive registration conrmation and a link for activation of your
ACCOUNT. Follow the link to conrm the newly created ACCOUNT.
Note: If you do not receive an e-mail in your inbox, please check the Spam or Junk
folder.
6. There is an available application tesyCloud for a smartphone or a tablet for
both Android and iOS . operating system. The applications can be
found in the stores Google Play and App Store (the device which the
application will be installed on should be with the latest updated version of the
respective operating system or at maximum up to one previous version).
I. SETTINGS OF THE IN-BUILT WI-FI COMMUNICATION DEVICE
/QUICK START B/
1. Open the "tesyCloud" app.
2. In the “E-mail” and “Password” elds enter the email address and
password that you have specied and conrmed in your registration
on https://www.mytesy.com.
3. Press the «LOG IN” button.
The main screen of the app opens. Using commands from this screen,
you can:
3.1. Personalise your user prole;
3.2. Add dierent TESY appliances;
3.3. Control the appliances in the list of Devices and monitor their
current status;
Status indication of the appliance:
- the appliance has reached the set temperature;

- the appliance is heating-up;
- the appliance is oine and cannot be controlled remotely;
-the appliance is turned on. Press the button to turn the
appliance o;
- the appliance is turned o. Press the button to turn the
appliance on;
- Manual mode - you can set the desired temperature in the room
to be heated by moving the slider left and right.
- Program mode - the appliance functions when the settings in
Weekly Program menu have been done (week programmer).
You can exit this mode by switching the appliance on or o
from the ON/OFF button, or by changing the setting of the set
temperature, i.e. you are in the manual settings regime.
- Delay Start mode - the appliance is in O mode, you can use the
arrows to set the time when the appliance is to be switched on
within 96 hours.
4. Custom app settings.
To congure your account press the button on the main screen
of the app.
On the screen you will see the parameters that can be changed at any
time, as well as various useful information:
- Theme light/dark;
- Home screen;
- Privacy & security;
- Find a service;
- Local control of the device;
- Privacy & security;
In order to protect your personal data, the “Forget me” function is
provided and is available in the “Privacy & security” menu:
>
Attention: The selected function will delete Your prole along with
all the information stored so far.
The current prole cannot be restored or re-created within the next 24-
hour period.
To go back to the home screen press again the button.
5. Add a Cloud device
To add a device using the mobile app, press the «+» button.
5.1. Select the type of the device that you want to add: