To Next PageTo Next Page
Need help?Do you have a question about the TESY CN 03 100 EIS W and is the answer not in the manual?
General| Power | 1000 W |
|---|---|
| Thermostat | Yes |
| Installation | Wall-mounted |
| Overheat protection | Yes |
| Frost protection | Yes |
| Timer | No |
| Voltage | 230 V |
| Frequency | 50 Hz |
| IP Rating | IP24 |
| Type | Convector |
| Height | 400 mm |
| Width | 40 cm |
| Depth | 90 mm |
Step-by-step guide for detaching and securely attaching the appliance to the wall using provided braces.
Explanation of the control panel, including modes, buttons, and LED indicators for appliance operation.
Procedure for setting the appliance's current time, day of the week, hour, and minutes.
How to activate the heating mode, indicators, and automatic start based on room temperature.
Guide on adjusting the desired room temperature using the control buttons and display.
Instructions for setting a delayed start time for the heating mode, indicated by a timer LED.
Method to exit the heating mode, turning the appliance off and deactivating indicator lights.
Description of the anti-frost feature to prevent freezing and how to enable or disable it.
Procedure for adjusting the temperature sensor reading to match the actual room temperature.
Explanation of the adaptive start function that predicts and initiates heating for optimal comfort.
Method to lock and unlock the control buttons to prevent unintended changes by children.
Detailed guide on setting the weekly heating schedule with specific time and temperature points.
Steps to reset the appliance to its original factory default settings, requiring re-configuration.
Description of the built-in safety device that automatically shuts off the heater in case of overheating.
