FIXING THE UNIT TO THE
WALL
Drill the appropriate hole for fixing
the unit to the wall using the
measurements indicated in the
diagram and then fasten the
bracket (P) with the appropriate
screw and fischer.
INSTALLATION
ON THE RIGHT
INSTALLATION
ON THE LEFT
1
2
POSITIONING THE SHOWER
BASE
Place the bathtub in the corner of
the bathroom and make sure it is
on a level by using the appropriate
adjustable feet.
Prepare the drain connection using
the trap supplied with the hose for
the drain (position it as indicated
in the diagram).
N.B.: The unit must be installed af-
ter the floor and walls have been fi-
nished.
All screws and accessories which
are necessary for installation are
in the appropriate box
Bag (A) with screws for
steps 1 - 3 - 3a - 3b
To Next Page
Loading...