Teufel Motiv 5 Digital

Questions and Answers

B
Brandon StokesAug 12, 2025
Why is no Dolby/DTS multi-channel sound coming from my Teufel Motiv 5 Digital Recording Equipment?
- T
  Timothy FloresAug 12, 2025
  If your Teufel DecoderStation 5 is not playing multi-channel sound from a digital source, it's likely that the source itself isn't transmitting a multi-channel signal. Many digital sources output regular stereo sound (2.0). To resolve this, use the remote control to switch the decoder to a Pro Logic II mode or one of the DSP modes (5.1 stereo).
A
adriennedunnAug 18, 2025
What to do if the rear speakers aren't working on my Teufel Motiv 5 Digital Recording Equipment?
- T
  tiffany41Aug 19, 2025
  If the rear speakers or center speaker of your Teufel DecoderStation 5 aren't producing sound from stereo sources, it's because MP3s, radio, and many TV programs only offer stereo sound. Use the remote control to switch the decoder to a Pro Logic II mode or one of the DSP modes (5.1 stereo) to activate these speakers.
P
Preston SloanAug 27, 2025
Why can't I switch the surround configuration on my Teufel Motiv 5 Digital Recording Equipment?
- J
  Jason WernerAug 27, 2025
  If you're unable to switch the surround configuration on your Teufel DecoderStation 5, it's likely because you're using a digital input. When a Dolby or DTS signal is received, the DecoderStation 5 automatically selects the correct surround configuration.
U
ubartlettSep 2, 2025
Why is my digitally connected sound card not transmitting multi-channel sound to my Teufel Motiv 5 Digital Recording Equipment when playing computer games?
- R
  Rachael SimsSep 3, 2025
  Many soundchips can produce surround sound in real-time via the sound card's analogue outputs. However, digital encoding is necessary for transmission via a digital connection. If your sound card isn't capable of real-time encoding for transmission to the decoder, connect your 5.1 sound card to an analogue jack on the DecoderStation 5.