NINGBO TEVERUN TECHNOLOGY CO.,LTD
Specification Model：UKC2
9
/
11
Speed magnets ranges from 1 to 88
Assist parameter:Assist1/ Assist2/ Assist3/ Assist4/ Assist5
EABS level→1 to 5
F start level→1 to 5
R start level→1 to 5
F current→current limit of front motor
R current→current limit of rear motor
Export→NO/YES. When the export is on, the speed is limited to 25%. And it needs certain
initial speed for the motor to start power.
After finishing setting steps, select Exit or POWER button to exit or return to the main
menu.
8.7 Battery: Press M to enter into Battery information menu and information of Voltage,
Capacity, Cycle times, Temperature, Last Uncharge Time, Remain Capacity and Full Capacity is
indicated. Press M or POWER to exit or return to the main menu.
*If want to show the battery information,the battery must support tripartite communication.
8.8 Factory Setting：Enter Factory settings menu. Select YES to restore all parameter to factory
settings. All the parameters except odo will be restored to factory settings. Press BACK or
POWER to return to main menu.
To Next Page
Loading...