Tevion Digital Freeview Receiver

To Next Page

Digital Freeview Receiver

Quick Set-Up Guide

FUNCTIONS AND CONNECTIONS

CONNECTING TO YOUR TV

Helpline No. UK/Northern Ireland 01270 508538 Rep. Ireland 1800 995 036

Web Support www.quesh.co.uk

Model Number: 44217

Front Display

Rear Display

1. To connect your set top box to your TV,

simply follow these steps:

2. Connect the set top box to your existing

aerial point.

3. Insert one end of the scart cable (provided)

into the TV scart socket on the set top box,

then simply connect the other end to an

available scart socket on your TV.

4. (Optional) Insert one end of a COAXIAL cable

into the COAXIAL socket on the back of the

set top box, connect the other end to the

COAXIAL socket on our surround sound

system.

5. (Optional) Insert one end of a scart socket in

to the VCR socket, then connect the other

end into your VCR/DVD player.

6. (Optional) Insert one end of your RF loop

through cable into the RF LOOP THROUGH

socket on the set top box, then connect the

other end into your VCR’s RF IN socket.

7. (Optional) Insert one end of your RF cable

into the RF out socket on your VCR, then

connect the other end into the RF in socket

on the back of your TV.

1. Standby Indicator

2. Remote Control Sensor

3. USB Input

1. RF IN

2. RF Loop Through

3. VCR Scart

4. TV Scart

5. COAXIAL

6. Mains Cable

Note : When connecting your digital set top box to other equipment, e.g, TV or VCR , make sure to refer to the

relevant user manual for instructions. Also make sure you disconnect all the equipment from the mains power supply.

Need help?

Do you have a question about the Tevion Digital Freeview Receiver and is the answer not in the manual?

Summary

Functions and Connections Overview

Front Panel Display

Details the indicators and inputs on the front panel of the receiver, including Standby Indicator, Remote Control Sensor, and USB Input.

Rear Panel Connections

Lists and describes the input and output ports on the rear of the receiver, such as RF IN, RF Loop Through, VCR Scart, TV Scart, COAXIAL, and Mains Cable.

Connecting Your Set Top Box to Your TV

Aerial and TV Connection

Connect the set top box to the aerial point and use a scart cable to connect to your TV's scart socket.

Optional Audio and Video Connections

Connect to surround sound via coaxial, VCR/DVD player via scart, or use RF loop through and RF out cables.

Operating Your Freeview Box

Initial Setup and Channel Scan

Guide on performing a full frequency scan for channels upon first use or after standby.

Navigating Freeview Channels

Instructions on using the EPG to view installed services, select channels, and preview content.

Understanding Channel Status

Explains common messages displayed when a channel is unavailable, such as 'NO SIGNAL' or 'ENCRYPTED SERVICE'.

USB Media Playback

USB Multimedia Options

Details how to connect a USB device and access multimedia options like photos, music, and Divx movies.