Texas Automation Products DES-42 - User Manual

Heat Seal Machine
DES – 42
Texas Automation Products, Inc.
300 Nichols Drive
Hutchins, TX 75141

Summary

Installing the DES-42

Electrical and Compressed Air Requirements

Specifies the necessary electrical power and compressed air for operation.

Setting or Adjusting the Air Line Pressure

How to use the regulator to set and adjust the air line pressure.

Turning on Power to the DES-42

Steps to safely power on the machine and enter monitoring mode.

General Operating Principles

General Heat Sealing Principles

Actuating the Heat Seal Machine

Using the Emergency Release Pushbutton

Instructions on how to safely interrupt the machine cycle in emergencies.

Using the DES-42 Control Panel

Start-up and Monitoring Mode

Setting Cycle Dwell Time

Setting Top Platen Temperature

Setting Bottom Left Platen Temperature

Setting Bottom Right Platen Temperature

Setting a Control Lockout Sequence

Texas Automation Products DES-42 Specifications