This document is a user manual for the Texas CB 8750, a scythe mower or finger clipper designed for cutting grass and other vegetation.
Function Description:
The Texas CB 8750 is a walk-behind, engine-powered scythe mower. Its primary function is to cut grass and other vegetation using a reciprocating cutting bar, similar to a hedge trimmer but horizontally oriented. The device is designed for outdoor use, specifically for mowing larger areas or areas with taller, denser vegetation where a rotary mower might struggle. It features a robust design with a gasoline engine, large wheels for maneuverability, and an adjustable handle for user comfort and control. The cutting bar is located at the front of the machine, allowing the user to walk behind it as it cuts.
Important Technical Specifications:
The manual does not explicitly list all technical specifications such as engine power, cutting width, or weight. However, it does provide some details:
- Engine: Gasoline-powered, requiring SAE-30 oil for the engine and SAE-30 (0.6 liters) for the gearbox. The fuel tank capacity is not specified, but it uses unleaded E5 gasoline.
- Oil Change: The engine oil should be changed after the first 5 hours of operation, then at least 1 time per year.
- Spark Plug: The spark plug gap should be between 0.7 and 0.8 mm.
- Vibrations: The EC Declaration of Conformity states a guaranteed sound power level (LWA) of 108 dB(A), a measured sound power level (LPA) of 90.7 dB(A), and maximum vibrations (Ah, max) of 13.647 m/s² with a K-value of 1.5 m/s².
- Cutting Bar: The cutting bar is a key component, and its blades must be sharp and undamaged for optimal performance.
Usage Features:
The CB 8750 is designed for ease of use and maneuverability in various outdoor conditions.
- Starting: The manual outlines steps for starting the engine, including checking oil and fuel levels, engaging the clutch, and using the recoil starter.
- Operation: Users are instructed to maintain a safe distance from the cutting bar and to be aware of the surroundings. The handle height is adjustable to suit different users, and the cutting bar can be adjusted for different cutting heights.
- Safety: The manual emphasizes numerous safety precautions, including wearing appropriate personal protective equipment (PPE) such as safety glasses, gloves, and sturdy footwear. It warns against operating the machine in wet conditions, near children or animals, or under the influence of alcohol or drugs. It also highlights the risk of thrown objects, hot surfaces, and sharp blades.
- Adjustments: The handle can be adjusted in height and angle for ergonomic use. The cutting bar can also be adjusted to different positions (L and R) and heights (3 positions) to optimize cutting.
Maintenance Features:
Regular maintenance is crucial for the longevity and safe operation of the CB 8750.
- General Checks: Before each use, users should check all bolts, screws, nuts, and decks for tightness. The cutting bar and belt cover should be checked for damage.
- Engine Maintenance: This includes regular oil changes (first after 5 hours, then annually), checking and cleaning the spark plug, and inspecting the air filter. The air filter should be cleaned regularly, especially in dusty conditions, and replaced if damaged.
- Fuel System: The fuel tank should be filled with unleaded E5 gasoline, and users are warned against overfilling. The fuel system should be checked for leaks.
- Cutting Bar Maintenance: The cutting bar blades must be kept sharp and undamaged. The manual provides instructions for checking and adjusting the cutting bar, including tightening bolts and ensuring proper alignment. It also details how to replace damaged blades.
- Storage: Before storing the machine for an extended period, it should be thoroughly cleaned, the fuel tank emptied, and the engine oil changed. The spark plug should be removed, and a small amount of oil should be added to the cylinder to prevent rust.
- Cleaning: The machine should be cleaned after each use, removing grass and dirt from the engine, cutting bar, and wheels. Water should not be used directly on the engine or electrical components.
- Warranty: The product comes with a 2-year warranty for private users and a 1-year warranty for commercial users in the EU. The warranty covers material and manufacturing defects but excludes normal wear and tear of wearing parts such as blades, belts, and spark plugs. It also does not cover damage due to lack of service, structural changes, exposure to external conditions, or improper use.
Need help?
General
To Next Page
