For more information on the AM335x Starter Kit, visit www.ti.com/am335xskwiki
For more information on AM335x or to download the latest software, please visit
www.ti.com/am335x
For more information regarding the WL1271 solution, visit www.ti.com/connectivitywiki
For support questions, please contact: support@ti.com or www.ti.com/e2e.
Important Notice: The products and services of Texas instruments Incorporated and its
subsidiaries described herein are sold subject to TI’s standard terms and conditions of sale.
Customers are advised to obtain the most current and complete information about TI products and
services before placing orders. TI assumes no liability for applications assistance, customer’s
applications or product designs, software performance, or infringement of patents. The publication
of information regarding any other company’s products or services does not constitute TI’s
approval, warranty or endorsement thereof.
Trademarks in this issue: The platform bar and Sitara are trademarks of Texas Instruments.
All other trademarks are the property of their respective owners.
9
To prepare your workstation for software development, power off the kit, remove the µSD card,
insert into the included SD card adapter (if applicable) and insert it into your PC. If your PC does
not include an SD slot, USB SD card adapters are readily available. Follow the instructions below
for the corresponding OS of interest.
Android™ Development: Insert the Android SD card into your host PC, and locate the START
HERE folder. Run setup.htm.
Linux™ Development: From a Linux host PC, insert the Linux SD card into the PC, and locate the
START HERE folder. Run setup.htm.
Additional resourcesBegin development
To Next Page
Loading...
Need help?
General
