In order to perform a simulation, we must first set the seed. Typically, I suggest that
students use the last four digits of their social security number as the seed. From the
HOME screen type the last four digits of your social security number (or any number you
wish). Now press the STOç button. Finally, press the MATH button, highlight PRB and
select 1:rand. Press ENTER and you’ve set the seed!
Now press the MATH button again, highlight PRB and select 5:randInt(.
After randInt( appears on the HOME screen, type 1 , 2 , 100 )
Do not hit ENTER yet, we want to store the results in L1. Now press STOç following
by L1. Remember, L1 is obtained by pressing 2
nd
1. Now press ENTER.
ç
To Next Page
Loading...
