Texas Instruments TI-nspire CAS Touchpad - Device Reformatting and OS Deletion; Restarting and Preparing for New OS

© Texas Instruments Page 2 of 3 TI-nspire Touchpad OS reinstall C2H
http://education.ti.com
FAQ – 20/04/11
Step3–Devicewillbereformatted
 Confirmthereformattingoptionby
pressing[1].


Step4–DeletingOperatingSystem
 Noactionisrequiredforthisstep.The
progressbarmovesrepeatedlyacross
thescreenastheoperatingsystemis
cleared.



Step5–Restarting
 Oncetheoperatingsystemhasbeen
completelyerased,thecalculator
promptstorestart,pressanykey.


Step6–OperatingSystemnotfound
 Theoldorcorruptedoperatingsystem
hasnowbeencompletelyremoved.The
calculatorisnowreadytoacceptthe
newoperatingsystem.Connectthe
calculatortoacomputerwitheitherthe
TI‐nspireCASorTI‐nspireComputerLink
software.


Note:
 Thesoftwaremayautomatically
promptfortheinstallationofa
newoperatingsystem.Ifthis
occurs,press[continue]andfollow
theprompts.Thisstepmayrequire
accesstotheinternetifthefileis
notonthecomputer.


