Field Values
• Eng/US
Note: This option is only available on CAS handhelds and software.
Changing Default Document Settings
Complete the following steps to define default document settings for TI-Nspire™
documents and Scratchpad.
1. Save and close any open documents.
2. From the Home screen, press 5 2 (Settings > Document Settings).
The Document Settings dialogue box opens.
Exact Arithmetic OS CAS OS
3. Press e to move through the list of settings. Press £ to move backward through
the list.
A bold line around a box indicates it is active.
4. Press ¢ to open the drop-down list to view the values for each setting.
5. Press the £and¤ keys to highlight the desired option, then press xor· to
select the value.
6. Click OK to save the settings as default settings that will be applied to all new TI-
Nspire™ documents and to Scratchpad.
Changing Document Settings in a TI-Nspire™ Document
Complete the following steps to change document settings for an open TI-Nspire™
document. The settings will also be applied to Scratchpad and used as the default for
all new documents.
1. From an open document, press c 5 2 (c > Settings > Document
Settings).
The Document Settings dialogue box opens.
Configuring Handhelds 65
To Next Page
Loading...
Need help?
General
