Page 6
N Hopley. Sep 2015. TI-Nspire OS4.0
Page 6 - Using the TI-Nspire in Fixed Decimal Place Mode
In this example, we will select 3 decimal places.
Go to the Home screen by pressing c.
Press 5 to select Settings
Press 2 to select Document Settings
Select and then to Restore factory default
settings.
For Display Digits select Fix 3 (scroll down the list to below all the Float settings)
For Calculation Mode select Approximate
Select and then .
Access the Scratchpad Calculator by pressing ».
When you type 1^2345 and then press ·,
the display should look like that shown !
Notice that the number has been rounded to 3 decimal
places.
To Next Page
Loading...
