To Next PageTo Next PageWhy is oil leaking from the exhaust of my Texas Lawn and Garden Equipment?
If oil is leaking from the exhaust of your Texas Lawn and Garden Equipment, ensure the trimmer is used on full power. Also, check the fuel mix, using new fuel with the correct two-stroke mix. A dirty air filter can also cause this issue, so clean or replace it. If the problem persists, the carburetor may need adjustment, and you should contact your local dealer.
What to do if Texas Lawn and Garden Equipment engine starts but does not accelerate?
If your Texas Lawn and Garden Equipment engine starts but won't accelerate, the carburetor likely needs adjustment. Contact your local dealer for assistance.
What to do if Texas Lawn and Garden Equipment engine starts but can only run on full power and on half choke?
If your Texas Lawn and Garden Equipment engine starts but only runs on full power and half choke, the carburetor likely needs adjustment, repair, or cleaning. Contact your local dealer for assistance.
What to do if Texas Lawn and Garden Equipment engine starts, runs, and accelerates but can not run idle?
If your Texas Lawn and Garden Equipment engine starts, runs, and accelerates but cannot run idle, the carburetor likely needs adjustment. Contact your local dealer for assistance.
Why the line cannot be pulled forward on my Texas Lawn and Garden Equipment?
If the line on your Texas Lawn and Garden Equipment cannot be pulled forward, it might be melted together, in which case you should replace it. This can happen if you're using the tool too close to stones and walls. Alternatively, there might not be enough line, so try fitting more line.
How to fix a spool head that is difficult to turn on Texas Lawn and Garden Equipment?
If the spool head on your Texas Lawn and Garden Equipment is difficult to turn, the threads might be dirty, damaged, or full of grass. Try cleaning the threads and greasing or changing the spool head. Also, remove any grass.
General| Brand | Texas |
|---|---|
| Model | CG430B |
| Category | Grass trimmer |
| Language | English |
Instructions for detaching the trimmer head assembly from the gear housing.
Procedure for installing the blade onto the drive shaft using specified parts.
Guidelines for safe operation, handling, and maintenance when using the blade.
Steps to remove the blade assembly from the drive shaft.
Procedure to securely attach the trimmer head to the drive shaft.
Step-by-step instructions for starting the engine when it is cold.
Procedure for starting the engine when it is already warm.
How to safely shut down the engine using the stop switch.
