To Next PageTo Next Page
Need help?Do you have a question about the Texas TG485 and is the answer not in the manual?
General| Rated Speed | 3600 rpm |
|---|---|
| Fuel System | Carburetor |
| Lubrication System | Splash |
| Engine Type | 4-stroke, OHV, single cylinder |
| Fuel | Gasoline |
| Fuel Tank Volume | 6.5L |
| Oil | SAE 10W-30 |
| Oil Volume | 1.1L |
| Starting System | Recoil start |
Crucial step to fill the engine with SAE-30 oil before starting to prevent damage.
Details on recommended oil types (SAE 30, 10W-40) and engine oil capacities.
Step-by-step guide for draining old oil and refilling with new oil.
Information on using unleaded octane 95 fuel and proper tank filling.
Instructions for cleaning the air filter element and ensuring correct mounting.
Guide to starting the engine using the primer and starter cord, considering temperature.
Important notes on exhaust, noises, vibrations, and troubleshooting during operation.
Steps for removing, cleaning, checking gap, and replacing the spark plug.
Guidance on positioning the engine for transport and preparing it for storage to prevent damage.
Table outlining required maintenance tasks at various operating hour intervals.
Detailed specifications for TG485 and TG585 models, including engine type, power, and weight.
