EasyManua.ls Logo

Texas TG470 User Manual

Texas TG470
58 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
TG470 - TG470V - TG470EV
TG570 - TG570V - TG570EV
DK Brugsanvisning
GB User manual
SE Bruksanvisning
РУС Инструкция по эксплуатации
F Manuel de I’utilisateur
D Bedienungsanleitung
SI Navodila
HR Upute za uporabu
SK
Používateľská príručka
Texas A/S - Knullen 22 - DK-5260 Odense S - Denmark Version 17.1
Tel. +45 6395 5555
- www.texas.dk - post@texas.dk
ACHTUNG !
DENKEN SIE DARAN, VOR
INBETRIEBNAHME MOTORÖL (SAE-
30)
AUFZUFÜLLEN!
VIKTIGT !
KOM IHÅG ATT FYLLA PÅ MOTOROLJA
SAE-30
FÖRE START!
IMPORTANT !
REMEMBER TO FILL WITH ENGINE OIL
SAE-30
BEFORE START!
IMPORTANT !
NE PAS OUBLIER DE REMPLIR AVEC
DE L’HUILE DE MOTEUR SAE-30
AVANT LE DEMARRAGE !
VIGTIGT !
HUSK AT PÅFYLDE MOTOROLIE
SAE-30
FØR START!
ВАЖНО!
НЕ ЗАбУДЬТЕ ЗАПОЛНИТЬ
МОТОРНЫМ МАСЛОМ
OIL SAE-30
ПРЕЖДЕ ЧЕМ НАЧАТЬ!
DÔLEŽITÉ!
NEZABUDNITE NALIAŤ MOTOROVÝ
OLEJ SAE-30
PRED SPUSTENÍM!
É

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Texas TG470 and is the answer not in the manual?

Texas TG470 Specifications

General IconGeneral
BrandTexas
ModelTG470
CategoryEngine
LanguageEnglish

Summary

Safety Instructions

Oil and Oil Changing

Oil Capacity Check

Check oil level when engine is horizontal and without fastening the oil stick.

Engine Oil Changing Procedure

Procedure for changing engine oil: warm up, drain, refill with specified amount.

Fuel

Air Filter

Air Filter Inspection and Cleaning

Instructions for inspecting and cleaning the air filter, including removal and remounting.

Starting the Engine

Start Procedure

Procedure for starting the engine: prime, engage clutch, pull starter cord based on temperature.

Operation

Operating the Engine

Hold brake lever activated; monitor exhaust, noise, and vibrations during operation.

Spark Plug Service

Spark Plug Inspection and Cleaning

Procedure for spark plug maintenance: clean, check gap, replace if necessary.

Transport and Storage

Engine Transport

Transport engine horizontally to prevent fuel and oil spillage.

Engine Storage Preparation

Prepare engine for storage by adding oil, protecting parts, and storing in a dust-free area.

Maintenance Schedule

Specifications

Related product manuals