Why won't my Texas TX 601 Tiller engine start?
If the engine won't start, check the following: * Ensure the start/stop button is correctly set. * Verify the spark plug isn't defective. * Confirm the spark plug socket is correctly fitted. * Make sure the fuel valve is open. * Ensure the choke is open. If these steps don't resolve the issue, consult the engine manual for further advice.
What to do if blades are not rotating on my Texas TX 601?
If the blades are not rotating, here are some things to check: * Ensure there are no stones caught in the blades. If there are, remove them by detaching the blades. * Check that the throttle cable hasn't become detached. * Verify that the throttle cable can activate the engine when fully open. * See whether the V-belt is defective. * Make sure that the belt coupling is adjusted correctly.
How to fix a Texas TX 601 engine that is not running smoothly?
If the engine isn't running smoothly, verify the following: * Check that the choke has been released. * Make sure that the petrol has not been contaminated.
What to do if the blades continue turning on my Texas Tiller?
If the blades continue turning once free of the ground, stop the engine and contact your dealer.
Instructions for assembling the TX601 model, including parts list and steps.
To Next Page
General