17
If the blades are not rotating: 1. Check that there are no stones caught in the
blades. Remove any stones by detaching the blades.
2. Check that the throttle cable has not become
detached.
3. Check that the throttle cable can activate the engine
when fully open.
4. Check whether the V-belt is defective.
5. Make sure that the belt coupling is adjusted correctly.
The blades continue turning once 1. Stop the engine, contact your daler
free of the ground:
Specifications
Model TX601 TX602
Length (mm) 1350 1250
Width (mm) 550 550
Height (mm) 945 930
Weight, dry (kg) 56 60
Rotor speed, blades (rev./min.) 95 95
Working width (mm) 300-550 300-550
Handle Fixed Adjustable
Forward gear 1 1
Reverse gear 1 1
Working depth (mm) 330 330
To Next Page
Loading...
