INS154-7 11/17
present and signalling that the self activating S/A function will be re-enabled within
2 minutes, after which the LEDs will alternate slowly to signal normal operation. If
the tamper circuit is re-opened or remote power removed within the 2 minute
period, then Hold-Off mode will be restored.
N If Hold-Off mode is invoked but the tamper circuit is not opened or
remote power is not removed within 15 minutes then Hold-Off will
automatically start to cancel, indicated by the LEDs alternating rapidly for a
further 2 minutes.
N For safety reasons the strobe is disabled during Hold-Off mode.
N Hold-Off mode is immediately cancelled when the sounder is activated
from the control panel unless the system is powered down.
To Next Page
Loading...
