Need help?Do you have a question about the Texecom Odyssey Series and is the answer not in the manual?
General| Brand | Texecom |
|---|---|
| Model | Odyssey Series |
| Category | Security Sensors |
| Language | English |
Explains how to open different Premier Elite Odyssey models for installation.
Provides criteria and method for securely mounting the unit and ensuring it is level.
Details how to adjust the tamper sensitivity using the unit's microswitch.
Outlines the terminal connections for wiring the unit to the control panel.
Covers the additional wiring requirements for meeting EN50131-1 Grade 3 standards.
Utilizes the test input for remote sounder testing and fault relay indication.
Describes powering the unit from the battery before control panel power for safe installation.
Illustrates wiring multiple units together and managing current demand.
Guides on final testing and confirming correct operation of the unit.
Details methods for testing the siren and strobe, and confirming self-activation.
Safety precautions for installation and maintenance, including handling high voltage and batteries.
Details sounder volume (dB) and acoustic output characteristics.
Specifies sounder cut-off time and the unit's waterproof coating rating.
Indicates the IP rating for environmental protection for different models.
Lists the required supply voltage and typical current consumption.
Specifies the type of standby battery used in the unit.
Specifies the operating and storage temperature ranges for the unit.
Defines the EMC environment suitability for the unit.
Details flash tube type, rate, and discharge time.
To Next Page