Texecom Odyssey X3 User Manual

INS627-8 20/44
N If you need to delete the device from the system you should first put it into
"hold off " mode and remove the batteries.
N If the device will not learn to the system check that all batteries are installed
correctly.
1.11 LED Indications (Odyssey X-W only)
The Odyssey X-W LEDs aid in the installation of the device and act as status
indicators. The table below details the status of each LED indicator.
N The LED jumper has no effect on the status described below.

Texecom Odyssey X3 Specifications

General

Brand	Texecom
Model	Odyssey X3
Category	Marine Equipment
Language	English