Premier Series User Guide Operating the Alarm System
INS221 9
To CHANGE Your User Code
Users with access to this option can change their own User codes. User codes are
unique to each user and can be 4, 5 or 6 digits long.
!"
Only the User code that is entered to access the change code menu will be changed.
Before changing your code, it is vital that you memorise or write down the new
code you are about to program. Failure to remember your code will require an
engineer visit to re-program a new code for you. This may incur a call-out charge.
1. Enter the User code that requires changing
,,,,
2. Press
4
3. Press
*
4. Press
(
5. Press
*
6. Enter a new 4, 5 or 6-digit User code
,,,,
7. Press
*
to accept the new code
8. Press
1
to exit the menu
The display will return to normal.
To Next Page
Loading...
