Premier 48, 88 & 168 Factory Defaults and Quick Reference Guide Quick Reference Guide
INS222 7
*
Global Options
!#
System Timers Use
(
to select a timer,
!
-
'
to enter a value,
"
to accept
#
01: Exit Settle Time
!
13: Pulse Period 2
!
25: Zone Response
#
!
02: Global Bell Dly.
!
14: Pulse Period 3
!
26: Keypad PA Delay
#
!
03: Global Bell Dur.
!
15: Line Fault Delay
!
27: Confirmation Dly
#
!
04: Double Knock Dly
!
16: AC Off Delay 28: Warning Delay
#
05: Beam Pair Time
!
17: Batt Test Period 29: Keypad Lock Time
#
!
06: Activity Delay
!
18: Batt Test Time 30: Eng. Log Off Dly
#
!
07: Abort Delay
!
19: Soak Test Time 31: Fire Bell Delay
#
!
08: Courtesy Time
!
20: Service Interval 32: Forced Entry Dly
#
09: Defer Arming By
!
21: Test Call Every 33: Supervision Time
#
!
10: Auto Arm Delay
!
22: Min Random Time 34: Poll IP Every
#
!
11: Menu Time Out
!
23: Max Random Time
#
!
12: Pulse Period 1
!
24: Door Strike Time
$#
System Config.
!
Use
(
to select an option,
&
to change the option,
"
to accept
#
!
00: (No Bell/Bell on) Arm Fail
!
20: (Predictive/Normal) Text
#
!
01: Bell is an (SAB/SCB)
!
21: Zone Short=(Active/Tamper)
#
!
02: Clock is (12Hr/24Hr)
!
22: R/R=(Reset Only/Silence/RST)
#
!
03: (Manual/Auto) BST/GMT
!
23: User Codes (Pulse/Latch)
#
!
04: (Hide/View) Armed Areas
!
24: Test Call = (Timed/Timed)
#
!
05: (Area/Global) Bell Time
!
25: Batt Test = (Timed/Disarm)
#
!
06: 24Hr Omit (Global/Local)
!
26: Bell = (1
st
Alarm/2
nd
Alarm)
#
!
07: (Leave/Remove) Omits
!
27: SNDR = (1
st
Alarm/2
nd
Alarm)
#
!
08: Away (Override/Enforce) Delay 28: Conf. = (Instant/Delayed)
#
!
09: NVM is (Unlocked/Locked)
!
29: Abort = (Eng. Reset/User Reset)
#
!
10: Engineer (Only/+ User)
!
30: (Auto/Manual) AV Outputs
#
!
11: Chime (Audible/Visible)
!
31: Clock = (50Hz/Crystal)
#
!
12: Omit Tampers (NO/YES)
!
32: (40/80) Column Printer
#
!
13: (Offline/Online) Printing 33: (Enable/Disable) Text
#
!
14: Activity Fault (View/Hide) 34: EN50131 (Disabled/Enabled)
#
!
15: (Hide/View) Exit Errors 35: (2
nd
Zone /1
st
Zone) = Confirm
#
!
16: (No/Enable) Code Tampers 36: (Global/Local) Keypads
#
!
17: Code Tamp (Alarms/Locks) 37: Panel Grade (2/3)
#
!
18: Areas (1-8/A-H) & I-P 38: (Enable/Disable) RF FOB PA
#
!
19: (Auto/Manual) Area Select 39: Mask=(Fault/Alarm)
)#
System Options
!
Use
(
to select an Option,
!
-
'
to enter a value,
"
to accept
#
!
1: Advisory Volume
!
4:
!
Anti-code Resets 7: Quick Count
#
!
2: Chime Volume
!
5:
!
Multiple Knocks 8: Modem Level
#
!
3:
!
Number Of Re-Arms
!
6: Adjust Clock
*#
Monitor Hardware
!
Press
&
to edit,
(
to select an option,
&
to change the option,
"
to accept
#
!
$
P = Line Fault
!
+
B = Bell Tamper
!
.
B = Battery Faults
#
!
)
A = AC Power
,
A = Aux Tamper
#
!
*
F = Aux Fuse Blown
!
-
L = Panel Lid
+#
Control Timers Use ( to select an area,
!
-
'
to enter the 1
st
On time,
"
to accept
Use
$
-
.
to select the 1
st
On time days of operation,
"
to accept
Use
!
-
'
to enter the 1
st
Off time,
"
to accept
Use
$
-
.
to select the 1
st
Off time days of operation,
"
to accept
,#
System Text Use
(
to select a message,
!
-
'
to select characters (press the required key the
appropriate number of times),
"
to accept
-#
Part Arm Text Use
(
to select a Part Arm,
&
to edit the Part Arm text,
!
-
'
to select characters
(press the required key the appropriate number of times),
"
to accept
.#
Holiday Dates Use
(
to select a holiday date,
!
-
'
to enter the required date
(
223344
),
"
to accept
%#
Speaker Tones Use
(
to select a tone type,
&
to turn the tone on/off,
"
to accept
'#
PC Output Text Use
(
to select an Output,
&
to edit,
!
-
'
to select characters (press the required
key the appropriate number of times),
"
to accept
(#
Custom O/P Text Use
(
to select an Output,
&
to edit,
!
-
'
to select characters (press the required
key the appropriate number of times),
"
to accept
To Next Page
Loading...
